Difference between revisions of "Heat Transfer Equipment"

From processdesign
Jump to: navigation, search
Line 7: Line 7:
 
=Heat Exchangers=
 
=Heat Exchangers=
 
Process equipment and streams will need to be heated or cooled. One way to reduce consumption of utilities is to exchange heat between these streams. For example, if a product stream requires cooling, the excess heat can be used to preheat a feed stream that requires heating by using an appropriate heat exchanger. Here the costs of an additional heating and additional cooling unit are eliminated, and replaced by the cost of a heat exchanger. The associated utility requirements of the additional units are also eliminated and replaced by the utility requirements of operating the heat exchanger.
 
Process equipment and streams will need to be heated or cooled. One way to reduce consumption of utilities is to exchange heat between these streams. For example, if a product stream requires cooling, the excess heat can be used to preheat a feed stream that requires heating by using an appropriate heat exchanger. Here the costs of an additional heating and additional cooling unit are eliminated, and replaced by the cost of a heat exchanger. The associated utility requirements of the additional units are also eliminated and replaced by the utility requirements of operating the heat exchanger.
 +
==sub1==
 +
===sub2===
  
=Boilers=
+
=Boiling and Condensing Heat Transfer=
 
+
 
+
=Condensers=
+
  
 
=Heaters and Coolers=
 
=Heaters and Coolers=

Revision as of 11:32, 13 January 2014

Heat Transfer Equipment


Contents


Heat Exchangers

Process equipment and streams will need to be heated or cooled. One way to reduce consumption of utilities is to exchange heat between these streams. For example, if a product stream requires cooling, the excess heat can be used to preheat a feed stream that requires heating by using an appropriate heat exchanger. Here the costs of an additional heating and additional cooling unit are eliminated, and replaced by the cost of a heat exchanger. The associated utility requirements of the additional units are also eliminated and replaced by the utility requirements of operating the heat exchanger.

sub1

sub2

Boiling and Condensing Heat Transfer

Heaters and Coolers