Reactors

From processdesign
Jump to navigation Jump to search


Title: Reactors

Author: Sean Cabaniss, David Park, Maxim Slivinsky and Julianne Wagoner

Steward: Fengqi You

Date Presented: February 4, 2014 /Date Revised: February 4, 2014


Introduction

Ideal Reactors

Plug Flow Reactor (PFR)

A PFR with tubular geometry has perfect radial mixing but no axial mixing. All materials hav the same residence time, τ, and experience the same temperature and concentration profiles along the reactor. Equation for PFR is given by:

where M = molar flow rate, dV is the incremental volume, and R is the rate of reaction per unit volume.

This equation can be integrated along the length of the reactor to yield relationships between reactor resident time and concentration or conversion.

Continuously Stirred Tank Reactor (CSTR)

In a CSTR there is no spatial variation- the entire vessel contents is at the same temperature, pressure, and concentration. Therefore the fluid leaving the reactor is at the same temperature and concentration as the fluid inside the reactor.

The material balance across the CSTR is given by:

General Reactor Design

The design of the reactor should not be carried out separately from the overall process design due to the significant impact on capital and operating costs on other parts of the process[1].

Collect Required Data

Out of all process equipment, reactor design requires the most process input data: reaction enthalpies, phase-equilibrium constants, heat and mass transfer coefficients, as well as reaction rate constants. All of the aforementioned parameters can be estimated using simulation models or literature correlations except for reaction rate constant constants, which need to be determined experimentally.

Enthalpy of Reaction

The heat given out in a chemical reaction is based on the enthalpies of the component chemical reactions, which are given for standard temperature and pressure (1 atm, 25 C).

Equilibrium Constant and Gibbs Free Energy

Reaction Mechanisms, Rate Equations, and Rate Constants

Heat and Mass Transfer Properties

Select Reaction Conditions

Chemical or Biochemical Reaction

Catalyst

Temperature

Pressure

Reaction Phase

Solvent

Concentrations

Determine Materials of Construction

Determine Rate-Limiting Step and Critical Sizing Parameters

Mixing

Heating and Cooling

Basic Principles

Stirred Tank Reactors

Catalytic Reactors

Preliminary Sizing, Layout, and Costing of Reactor

Estimate the Performance

Optimize the Design

Multiphase Reactors

Reactor Design for Catalytic Processes

Design of Bioreactors

Safety Considerations in Reactor Design

Capital Cost of Reactors

Types of Reactors.PNG


Conclusions

References