Difference between revisions of "Sugar Cane Ethanol Plant"
(→Bagasse Hydrolysis Results)
(→Bagasse Hydrolysis Results)
|Line 290:||Line 290:|
Revision as of 12:59, 15 January 2014
As the alternative energy industry continues to grow in the United States, Global Impact Chemical Corporation (GICC) has taken interest in producing vehicle biofuel from plant matter such as sugarcane. With a capital cost limitation of 1 billion USD, a process plant design and the corresponding economic analysis were devised. Liberia, Guanacaste Province, Costa Rica was chosen as the plant’s location due to inexpensive cost and proximity to rich natural resources. Due to market demand of anhydrous ethanol in the United States and hydrous ethanol in Brazil, both forms of ethanol may be produced with the proposed plant design.
Research on current ethanol manufacturing processes guided the final design of the ethanol plant. The proposed design was divided among three major processes: milling, fermentation, and separations. An electricity cogeneration system and an additional bagasse hydrolysis process assist in keeping the proposed plant self-sufficient and increase ethanol production. Microsoft Visio and Aspen HYSYS were used to design complete process flow diagrams and simulate the fermentation and separations processes. All other calculations were performed in Microsoft Excel. It was estimated that an initial feed of 147 tons per hour of sugarcane, milled and fermented with the bacteria S. Cerevisiae, produced the desired total of 20,000 kg/h of hydrous ethanol and 19,500 kg/h of anhydrous ethanol. Aspen Economic Analyzer aided in estimating the cost of the sized equipment in each of the three major processing steps. The total capital cost of the plant, as designed, is estimated as $465.9 million.
Economic analysis predicts a net present value of $240 million on a twenty-year basis. Furthermore, the estimated rate of return is 19.7% after twenty years, with a pay-back period of 4.10 years, satisfying the desired payback time of three years. A gross margin percentage of 70% after plant startup was calculated, thus the plant’s potential financial performance is significantly better than the average range of 40-50%. According to the analysis, the proposed sugarcane ethanol plant design would be economically viable and would provide GICC with a promising first step towards a biofuel for alternative fuel vehicles.
Fuel ethanol has been an important alternative fuel for decades. With petroleum prices reaching upwards of $100 per barrel on a regular basis, the market for fuel ethanol is poised to grow even further. Currently the largest producer of ethanol in the world is Brazil, where a combination of fuel composition standards, supplier incentives, and low sugarcane prices combine to make the production of sugarcane ethanol a lucrative opportunity. The market in Brazil appears to be nearing saturation, however, as evidenced by a growth rate in production of only 5% from 2009 to 2010 . This pales in comparison to the near 30% growth that the US market has experienced over the last 5 years. It is believed that much of this growth is due to the high gasoline prices in the country and that this may be addressed by an increase in the production of alternative fuels. Our team has decided to pursue the design of a sugarcane ethanol plant to be located in Costa Rica which will serve both the domestic, Costa Rican market, and the US market. Costa Rica offers an area with low sugarcane prices which will allow us to follow the more efficient sugarcane-fed process instead of the cornbased process pursued in the US. Costa Rica also offers free-trade agreements  which allow the ethanol to pass into the US tariff free, providing a significant advantage over Brazilian competitors.
Anhydrous ethanol, contains 99.5 wt% ethanol, while hydrous ethanol contains only 95 wt% ethanol. Anhydrous is required for vehicle use in the United States, as opposed to Brazil which uses hydrous. The key difference is an azeotrope that is required to be crossed in the ethanol-water mixture to distill to anhydrous ethanol.
The actual design of our plant was driven by current manufacturing processes found in literature. The design is split up into four main sections for simplicity which are milling, fermentation, separations, and utilities. Aspen HYSYS was used to model the separations process unit while Microsoft Excel was used in the design of the fermentation and milling units. All Process Flow Diagrams were produced in Microsoft Visio.
This venture seeks to produce anhydrous ethanol for domestic sale in Costa Rica and for export to the United States market. In 2008, the Costa Rican government established a mandate dictating that all gasoline sold domestically must contain 7% ethanol. The Costa Rican government expects to increase the percentage of ethanol mixed with gasoline to 12% in the next 4-5 years. Over the past two decades the U.S. ethanol market has grown dramatically. Between 1990 and 2007, U.S. ethanol consumption increased from 3.4 billion liters per year to 26 billion liters per year. Such a significant increase in demand is attributed to the implementation of the Clean Air Act and the establishment of a renewable fuel standard in the Energy Policy Act of 2005. The renewable fuel standard requires that gasoline sold in the U.S. contain a renewable fuel standard, such as ethanol. The latter mandate required 15 billion liters of renewable fuel in 2006, increasing to 28 billion liters in 2012. The Energy Independence and Security Act of 2007 expanded the renewable fuel standard, reaching an ultimate peak of 136 billion liters in 2022 . In 2009, Costa Rica produced 100 million liters of ethanol, 70 million of which were exported . It is important to note that these values are significantly less than the production values for the years preceding 2009 as a result of the global reduction in demand. It is anticipated that Costa Rica’s annual ethanol export growth mimics the average annual growth rate of the U.S. market of 38 percent. Domestic consumption is anticipated to increase 10% annually. The proposed plant will seek to capture (based on 2015 values, when construction of the plant will be completed) 5% of the domestic market, and 30% of total ethanol exports. In order to achieve this goal, the present ethanol plant is designed to produce 178 million liters of ethanol per year. This information is summarized in the attachment SCEP Design Basis vFP.
The total fixed capital cost of the current design is $465.9 million. The ISBL is $267.3 million and the OSBL is $178.2 million, with an engineering and contingency cost of $20.5 million. This cost, and all other price data, were adjusted for Costa Rica’s geographic location and 2011 dollars. The main product revenue from anhydrous ethanol is $117 million annually, with additional revenues of $84 million and $3 million generated from the sale of electricity and food or industrial grade carbon dioxide, respectively. The cost of cost of sugar-cane, our raw material, adds up to $18.4 million annually. Other variable capital costs include waste removal at $6.1 million annually and consumables at $3 million annually. All available capital cost streams can be viewed in the Cost of Production spreadsheet in the attachments. Using the 7 year MACRS depreciation method, a 30% tax rate , and capital available at 12%, the project is estimated to have a simple payback in just over 4 years with a net present value (NPV) of $27.2 million and $240 million at 10 and 20 years, respectively. The 10 year internal rate of return (IRR) is 13.5%, after 20 years IRR is equivalent to 19.7%. While the NPV and IRR financial estimates meet the goals set out by the CFO at the beginning of the project, the simple payback period is one year shy of the CEO’s goal. Two areas of potential error that need to explored future are royalties cost for the Organsolv process used (discussed in Bagasee Hydrolysis section) and the electricity regulatory statutes in Costa Rica. Additionally, the values in this economic analysis may fluctuate slightly as all of the smaller components of the plant such as pipelines undergo final design and sizing. The economic calculations are in the attachments Economic Analysis v4 and ICARUS Project Summary.
Costa Rica was chosen for a host country for several reasons. First, Costa Rica is a signatory of the Central America and Dominican Republic Free Trade Agreement (CAFTA-DR), which facilitates free trade (duty free) between the Unites States and Costa Rica. As per the ethanol provision of the CAFTA-DR, in alignment with the Caribbean Basin Initiative (CBI), which has limited ethanol imports to the United States at 7% of US domestic production, Costa Rica is allotted 117 million liters of ethanol exportation to the US annually. As of 2005 Costa Rica was exporting about 57 million liters annually to the US, while the US market for fuel ethanol consumption has increased by 11% per year from 1995 to 2004. Therefore, Costa Rica can certainly find a market for the addition 57 million liters annually it is allotted to export to the US. Other sugar rich countries such as India and Brazil are not in the free trade agreement, and therefore are subjected to harsh tariffs on exports to the US. CAFTA-DR and CBI also prohibit ethanol with origins other than the signatories (ethanol processed but not synthesized in the signatories) from entering the US, therefore complete production in Costa Rica is necessary . The one unfortunate element of producing in Costa Rica is a lack of government incentives; however, it is possible that they could appear with the increase in fuel blend requirements. With the strongest economy and most stable government in Central America, Costa Rica made an excellent choice for plant location .
Currently, companies are developing ethanol production facilities in Costa Rica. One such company is United Biofuels of America. While these facilities will provide competition to our production plant, the overall trend towards less petroleum dependence within the country will provide business for many facilities. On the raw materials side, there has been a steady increase in sugar cane production in Costa Rica over the last fifty years .
The plant will be located in Liberia, Costa Rica as shown in figure 1. Liberia is the capital of the Guanacaste Province and is the home to a population of over 35,000. Liberia was chosen within Costa Rica due to its proximity to many sugar plantations, Pacific Ocean ports, and the Pan-American Highway. Additionally, the Tempisque River runs adjacent to the town, providing on site fresh water. The proximity to the sugar plantations will reduce the shipping costs associated with procurement of the raw sugar cane. The Pacific Ocean will provide shipping access to foreign nations. The Pan-American Highway will provide necessary infrastructure for materials procurement and product shipping. Additionally, Costa Rica offers potential for shipping from the Atlantic (Caribbean) coast to add lucrative markets such as the European Union.
The design is planning to purchase a site just northwest of the town, at the intersection of the Tempisque River and the Pan-American Highway. This site will provide proximity to Liberia and neighboring towns for our plant staff, without bringing the industrial complex to the cultural and beautiful city center. If adequate public transit does not already exist, GICC will look to partner with city officials to develop a bus system between the city center and the plant. This is just one of many plans GICC has explored to be a good corporate citizen in Costa Rica. The one square kilometer site is estimated to cost $30 million.
Guanacaste Province, is also home to one of Costa Rica’s best technical universities, Invenio, which is located in Canas. Invenio is a premier science and technology university. The Guanacaste Operations team is developing methods to involve the current and future student body through internships on the development, and operation of the plant . In the future, GICC will look to Invenio for a source of engineers and other technical personnel to run the plant.
The production of ethanol through the process of sugarcane fermentation is a three-step process which has been used for many years in such sugar-rich countries, such as Brazil. The entire process may be divided into milling/pretreatment, fermentation, and ethanol purification process units. In the milling section, the raw sugarcane is washed and grinded to form a sucrose product which is then purified using crystallization. The bagasse, which is the leftover product from the sugarcane milling, is separated out and passes through another process in order to convert it into usable feedstocks. The bagasse is a cellulosic material which, in its raw form, cannot be processed by the yeast cells present in the fermentation reactors. To create a usable feedstock from the bagasse, ninety percent of the material undergoes an acid hydrolysis step which converts the material into a glucose solution. The remaining ten percent is sent to steam boilers to be burned as fuel. The steam boilers use the bagasse fuel as well as lignin removed in the milling process and field trash that accompanies the sugar cane from the farmer, to generate enough steam to run the plant and generate plant electricity. Excess electricity generation is sold on the market for additional revenue.
The glucose and sucrose solutions are then mixed before being sent to a storage tank prior to the fermentation process unit. This storage tank allows the mill to run continuously while the fermentation unit runs as a staggered, batch process. The sugar solution in the storage tank is then mixed with the growth medium for the fermentation and is sent to an appropriate fermentation vessel which has been preloaded with the required yeast for the process. The fermentation will run for twenty seven hours during which eighty seven percent of the sugar present initially is consumed. At the conclusion of the twenty seven hour period, the batch vessel will contain a 12.5 wt. % solution of ethanol in water which will be sent to another storage tank. This storage tank will feed into a continuously operated hydrocyclone which separates the yeast from the reactor effluent. The purified solution will then be sent to the ethanol purification unit while the yeast is mixed with water and pumped to a propagation vessel to be regenerated for the next fermentation.
The solution entering the ethanol purification unit undergoes a series of distillation steps to separate out the various components of the mixture. Significantly, carbon dioxide is separated from the solution and compressed into cylinders for sale as beverage grade carbon dioxide. These distillations proceed until an azeotrope is formed at 95.63 wt. % ethanol at which point entrainment distillation using benzene is performed to produce anhydrous ethanol with a purity of greater than 99%. Further information about the flow rates are available in the attachments SCEP Design Basis vFP and Cost_of_Production.
The following pages contain a full three page PFD of the process. The first pages is Milling/Pre-treatment of Sugarcane, which inputs raw sugarcane and creates a sucrose and glucose mixture to feed the fermenters. The second page is Fermentation and Separations, which utilizes the sucrose and glucose mixture, fermenting it into an ethanol solution, and then purifying that solution to the final product. The third page is Plant Utilities, which documents the major utility equipment of the facility. Each will be explained further later in the paper, including an equipment list.
Production is scheduled for 300 days of the year, running continuously from February to early December. In December, the plant will shut down for maintenance, cleaning, training, and vacation. In January, the plant can optionally run the dehydration separation steps, bringing in hydrous ethanol as a feedstock and outputting anhydrous product. February will resume full production. This longer than expected shut down is because sugarcane does not grow all year round and can expire. Design Considerations: Milling
Milling and Pre-Treatment
Milling is a very standard process that has been used in the sugarcane industry for many years. With the success that current process equipment has had, the proposed design was modeled very closely to what is in use today . A cane diffuser extracts the desired sucrose needed for ethanol production from the harvested sugarcane. The sucrose mixture is then pretreated and concentrated to the correct concentration needed for efficient fermentation to occur. Based on the amount of ethanol produced, a sugarcane feed of 147 tons per hour is required to ultimately produce an 84 wt.% sucrose solution that will be mixed with the glucose solution that comes from the bagasse hydrolysis process. Table 1 summarizes the equipment chosen for this process.
The total cost of the milling equipment is summarized in Table 2.
A detailed discussion of the milling and pretreatment equipment and material streams is available in the attachment Milling Material Streams.
Key assumptions made for material balances and sizing were found in laboratory papers . in sizing the equipment, the multiple effect evaporators were assumed to be of equal size to make calculations simpler. In reality, each evaporator would be smaller than the previous one.
Although the milling of sugarcane closely followed the standard process used today, the sucrose extraction step and clarification step were researched and investigated for better options. As shown in Table 1, the sucrose extraction step is completed by shredding the sugarcane and thus breaking the cells in which sucrose is located, making it easier to extract. The clarification step is important because it removes the impurities from the cane juice that would otherwise only interfere with the product purity.
Conventionally, roller mills are the equipment of choice used to extract the sucrose from sugarcane. However, sucrose extraction by diffusion has recently emerged in the industry. The sugarcane goes through twelve stages where it is heated co-currently by imbibition water, immediately raising the temperature of the cane to about 75 °C . This heating even opens the cells that were not opened by the previous shredding process. Another advantage of this heating is that sugar destroying bacteria cannot survive at this temperature. However, in a mill tandem, the average temperature is between 30-35 °C, where these bacteria are still active . Extraction by diffusion boasts a higher extraction percentage, lower operating and manufacturing costs, and better mechanical reliability. The ratio of capital costs of a plant using a diffuser compared to one using a mill is about 1:1.5 . One downside of diffusion is that the shredding process is significant because the cane needs to be the right size for efficient diffusion to occur. Therefore, a heavy-duty shredder is needed, which is initially more expensive and requires more power. However, looking in the long run, the appeal of lower capital cost, lower operating and maintenance cost, and high extraction percentages made diffusion the better alternative.
The clarification process is important because it removes the impurities from the cane juice and also neutralizes its acidity. There were many options to consider: defecation (Ca(OH)2), magnesia (MgO2), sulphitation (lime and SO2), carbonation (lime and CO2), and phosphatation (lime and H3PO4) . Each differ in cost, the time needed to precipitate the impurities, and product purity. With these factors in mind, calcium hydroxide, also known as milk of lime, was chosen because its reaction time was the shortest and cost the least. The comparisons are shown in Table 3.
Milling Possible Errors
There were a few sources of possible error in the milling process. When sizing the diffuser, the main equipment piece in this section of the process, dimensions were extracted from existing diffuser models. Using the flow rate of sugarcane needed to produce the desired amount of ethanol, the size of the diffuser was estimated. Also, because the evaporators were assumed to be the same size, ICARUS produced a larger cost than it should be (viewable in ICARUS equipment list attachment). These possible errors would affect the overall cost of the design.
Bagasse Hydrolysis Results
Bagasse consists of the fibers that come out of the diffuser and in industry, it is generally burned in a cogeneration system that produces electricity to be used in different parts of the ethanol production process. However, recent processes have begun to process the bagasse in a way that it can be added into the fermentation step to increase ethanol production. About 90% of the bagasse produced is used to make ethanol while the remaining 10% is used to generate electricity. This process pretreats the cleaned bagasse with 2 wt.% sulphuric acid  and steam and through reactors, filters, distillation, and evaporation, a 25 wt.% glucose solution is produced. Sterilized sugarcane juice is diluted and added to the glucose solution to before entering the fermenters. The addition of the bagasse sugars increases ethanol production. Table 4 summarizes the equipment chosen for this process.
- All pretreatment and hydrolysis equipment will be made of stainless steel because sulphuric
acid is being used.
The total cost of the bagasse hydrolysis equipment is summarized in Table 5 below.
A detailed discussion of the bagasse hydrolysis equipment and material streams is available in the attachment Milling Material Streams.